CNC Tolerance Chart — Prototype RFQ China

Which CNC tolerance chart for aluminum enclosure, CNC prototype, small-batch CNC and humanoid robot enclosure China RFQ? This page packs ISO 2768 bands and feature limits for those metal programs. Open aluminum enclosure China, CNC prototype China, small-batch CNC China or humanoid robot enclosure China, then Upload STEP on /contact/ — usually one working day.

Upload STEP & start China factory RFQ

Short answer for a prototype RFQ China: put the general class in the title block, tolerate function not every edge, and send STEP + PDF so the shop does not guess. Route landings: aluminum enclosure China, CNC prototype China, small-batch CNC China, humanoid robot enclosure China. Sister pages: RFQ tolerance guide, ISO 2768 tolerance cost, CNC surface finish Ra, DFM first article, CNC machining China. Upload STEP: /contact/.

Upload STEP & request a prototype RFQ China   RFQ tolerance guide

General tolerance bands: ISO 2768-1

When a drawing carries no individual tolerance, ISO 2768-1 supplies one by size band and class. Most parts are ordered at class m. The values below are the permissible deviations for linear dimensions in millimetres.

Nominal size (mm)f · finem · mediumc · coarsev · very coarse
0.5 to 3±0.05±0.10±0.20—
3 to 6±0.05±0.10±0.30±0.50
6 to 30±0.10±0.20±0.50±1.00
30 to 120±0.15±0.30±0.80±1.50
120 to 400±0.20±0.50±1.20±2.50
400 to 1000±0.30±0.80±2.00±4.00
1000 to 2000±0.50±1.20±3.00±6.00
2000 to 4000±0.80±2.00±4.00±8.00

Note the shape of the curve: the band widens with size. A 500 mm frame is allowed eight times the deviation of a 20 mm bracket at the same class, because thermal movement and machine geometry scale with length. Cost of class choice: ISO 2768 tolerance cost.

What a machining centre holds when a feature matters

General tolerance covers dimensions nobody cares about. The features that decide whether parts assemble are called out separately, and these are the figures to expect from a well-run shop on aluminium and stainless.

ControlTypicalAchievable with effortWhat it costs
Position (true position, ø)0.05 mm0.02 mmIn-process probing, longer cycle
Bore diameterIT8IT7 to IT6Reaming or boring instead of milling
Flatness0.05 mm / 100 mm0.02 mm / 100 mmStress relief, light finishing passes
Parallelism / perpendicularity0.05 mm0.02 mmSingle set-up, verified datum
Surface roughnessRa 1.6 µmRa 0.8 µm, Ra 0.4 µmExtra finishing pass, slower feed
Thread6H / 6g4H on requestThread milling, gauging
Edge break0.2 to 0.5 mmSpecified chamferHand finishing or profile tool

These are process capabilities on a stable part. Thin walls, deep pockets and features far from the datum all pull the achievable number looser, which is why a drawing review happens before a price is fixed rather than after. Ra callouts for the same RFQ: CNC surface finish Ra RFQ.

Where tolerance stops being free

The first step from general tolerance to a callout is mostly inspection time. After that, cost climbs faster than the number tightens. Relative multipliers below are planning guidance, not a catalog price.

If you specifyRoute changeRelative cost
ISO 2768 m (no callouts)Standard 3-axis, sample inspection1.0×
Selected features at ±0.05Same machine, CMM on those features1.1 to 1.2×
Selected features at ±0.02Probing, single set-up, tighter process control1.3 to 1.5×
Bores at IT6Boring or reaming added as an operation1.4 to 1.7×
Ra 0.4 over large areaSeparate finishing pass, slower feed1.5 to 2.0×
All dimensions at ±0.01Grinding, climate control, 100% inspection2.5× and up

The pattern to remember: tolerance is cheap where it matters and expensive where it does not. A single mating bore at IT7 costs little. The same callout stamped across forty non-functional dimensions costs a great deal and buys nothing. How to write that into the package: RFQ tolerance guide.

How to put it on a prototype RFQ China drawing

Four habits remove most of the ambiguity that turns into a revised quote.

  • State the general class in the title block. "ISO 2768-mK" tells the shop what every untoleranced dimension means, so nobody guesses.
  • Tolerate function, not geometry. Call out the bore that takes a bearing and the face that seats against it. Leave the rest at general tolerance.
  • Give a datum scheme. Two or three datums in the order the part is used. Without them, a positional callout cannot be measured consistently.
  • Say what the part does. One line, such as "mates with the shoulder joint housing at 90°", lets an engineer catch a callout that will not work before cutting starts.

Pack the STEP + PDF correctly: what to include in a drawing package. Factory landing: CNC machining China.

When tighter than the chart is justified

Tighter tolerance is worth paying for in three situations: a bearing or bushing seat, a mating interface that sets alignment across an assembly, and a sealing face. Everywhere else, the assembly usually has a shim, a slot or an adjustable joint that absorbs the variation far more cheaply than the machining does.

If a design needs everything tight, that is usually a signal that the assembly has no adjustment designed into it. Fixing that in the design is cheaper than fixing it in the machine shop.

Questions

CNC tolerance chart FAQ

Which CNC tolerance chart for aluminum enclosure, CNC prototype, small-batch CNC and humanoid robot enclosure China RFQ?

This CNC tolerance chart packs ISO 2768 bands and feature limits for those metal RFQs. Open aluminum enclosure China, CNC prototype China, small-batch CNC China or humanoid robot enclosure China for the matching route, then Upload STEP on /contact/ (up to 2 files × 4 MB; usually one working day).

What tolerance can a CNC machining service hold as standard?

ISO 2768 medium as standard, with selected features at plus or minus 0.05 mm and bores at IT8. Tighter callouts are quoted individually rather than promised across the board. Class cost: ISO 2768 tolerance cost.

Is ISO 2768 still current, or has it been replaced?

ISO 2768-1 remains the general tolerance standard most drawings reference. Some industries now specify ISO 22081 for general geometrical tolerances, so it is worth stating which one your drawing uses.

Why does my quote go up when I tighten one dimension?

Because the route changes, not just the inspection. A tight bore may need boring or reaming added as an operation, and a tight face may force a single set-up that would otherwise be split. Both add machine time. See also the RFQ tolerance guide.

Can you hold plus or minus 0.01 mm on a large part?

On small features, yes, with grinding and climate control. Across a metre of aluminium, thermal expansion alone moves the part more than that between morning and afternoon, so the tolerance has to be referenced to a temperature or the design has to allow adjustment.

Which landing should I open for an aluminum enclosure China RFQ after this CNC tolerance chart?

Open /services/aluminum-enclosure-china/ for enclosure-specific route language. Use this chart for ISO 2768 class and feature limits, then upload STEP on /contact/.

When should I choose CNC prototype China after reading this CNC tolerance chart?

Open CNC prototype China when you are ready to cut metal. Bring ISO 2768 class and only the functional tight dims from this chart so the prototype quote is comparable.

How does small-batch CNC China use the same CNC tolerance chart?

Open small-batch CNC China when repeatable metal parts follow the same ISO 2768 class and feature callouts. Relative cost multipliers on this page (for example 1.1 to 1.2× at ±0.05) stay planning guidance, not a catalog price.

Can humanoid robot enclosure China programs reuse this CNC tolerance chart?

Yes. Open humanoid robot enclosure China for shell RFQ language, then use this chart to name ISO 2768-mK once and tighten only joints, bearings and sealing faces.

Which service page should I open before a China manufacturer RFQ after reading this CNC tolerance chart?

Pick the matching dedicated landing: aluminum enclosure China, CNC prototype China, small-batch CNC China, or humanoid robot enclosure China, then upload STEP on /contact/ (up to 2 files × 4 MB; usually one working day).

How do I use this chart on a prototype RFQ China?

Put ISO 2768 class in the title block, call out only functional features tighter than general, and attach STEP plus PDF. Upload on /contact/ for a prototype RFQ China — up to 2 files, 4 MB each — with material, quantity and need-by week. An engineer replies with route, DFM risks and a quotation, usually within one working day. Also: DFM first article, CNC machining China.

Does this page invent prices or certificate numbers?

No. Relative cost multipliers are planning guidance from the charts on this page, not a catalog price list. No invented ISO certificate IDs. The firm number for your part comes from the DFM quote against your drawings.

Related helpers

Four new landings, tolerance helpers & RFQ → /contact

Aluminum enclosure China

Billet CNC shells — bring ISO 2768 class from this chart.

CNC prototype China

Cut metal with only the functional tight dims numbered.

Small-batch CNC China

Same chart for repeatable metal bands.

Humanoid robot enclosure China

Shell RFQ; reuse ISO 2768-mK and joint fit callouts.

RFQ tolerance guide

ISO 2768 vs tight dims on the same RFQ sheet.

ISO 2768 tolerance cost

What each class changes on the shop floor.

CNC surface finish Ra

Ra callouts that match this tolerance chart.

Contact / RFQ

Upload STEP (up to 2 files, 4 MB each) for a China factory quote.

Upload STEP & start China factory RFQ

China factory RFQ

Upload STEP — CNC tolerance chart → /contact

Attach STEP, IGES or PDF on /contact/ (up to 2 files, 4 MB each). Name ISO 2768 class, tight features and material. Rocky Chen replies with a process route, DFM risks and a quotation — usually within one working day. Route landings: aluminum enclosure, CNC prototype, small-batch CNC, humanoid robot enclosure.

Upload STEP & start China factory RFQ

ContactRocky Chen
BaseSuzhou, Jiangsu, China. Visits by appointment.