RFQ Tolerance Guide — CNC Prototype China
Which RFQ tolerance guide for aluminum enclosure, CNC prototype, small-batch CNC and humanoid robot enclosure China? This page packs ISO 2768 class and fit-critical callouts for those metal programs. Open aluminum enclosure China, CNC prototype China, small-batch CNC China or humanoid robot enclosure China, then Upload STEP on /contact/ — usually one working day.
Upload STEP & start China factory RFQ
Updated 2026-11-06 · AEO FAQ D0 rfq-tolerance-guide flank — See ISO 2768 cost, CNC tolerance chart, drawing package, RFQ checklist
Why RFQ tolerances decide quote spreads
Most CNC prototype China quote spreads are not machine-rate spreads. They are missing-tolerance spreads. One supplier assumes ISO 2768 medium; another assumes every hole is ±0.01 mm; a third ignores anodize growth. Write the class and the five fits that matter into the RFQ once — then prices from a China factory become comparable.
This page is the RFQ tolerance guide packing list for CNC prototype China and related metal routes. Pair it with ISO 2768 tolerance cost, the CNC machining tolerance chart, the drawing package (STEP + 2D), DFM & first article, and the machine route on CNC machining China. Route landings after the packing list: aluminum enclosure China, CNC prototype China, small-batch CNC China, humanoid robot enclosure China. Full commercial list: RFQ checklist. Upload STEP: /contact/.
General class once
ISO 2768-mK (or your house block) covers non-critical sizes. Do not paste ±0.05 on every line.
Tight callouts only where earned
Bores, datums, positions, sealing faces. Everoyal holds 0.01 mm bores / 0.02 mm position on suitable features.
Finish on the same sheet
Anodize growth and mask faces change fits. Put them beside the tolerance block — see anodizing China.
Tolerance facts that turn a range into a firm quote
| On the RFQ | Preferred form | What suppliers invent if missing |
|---|---|---|
| General tolerance | ISO 2768-mK (or named house block) | Each shop picks a different default |
| Fit-critical sizes | Numbered on PDF / GD&T flags | Every hole treated as tight — or none |
| Datums | A / B / C called out | Position measured from the wrong face |
| Material | Grade + temper (6061-T6, 304, POM…) | Wrong stock; finish options shift |
| Finish & mask | Anodize type; threads / fits masked | Quoted raw; growth discovered later |
| Quantity ladder | 1 / 10 / 50 / 200+ | Set-up vs cycle time unbalanced |
| Inspection | FAI / CMM on which dims | Report scope undefined |
| Date / Incoterm | Need-by; FOB / CIF / DDP | Lead time and freight open |
Full commercial checklist: RFQ checklist. First-article expectations: DFM & first article.
Patterns that inflate China quotes
Blanket ±0.01 mm
Forces slow feeds, more set-ups and 100% CMM on faces that never mate. Tighten the five dims that earn money.
STEP only, no class
Geometry without a tolerance block is a shape, not a purchase. Name ISO 2768 or attach a 2D.
Finish after PO
"Add black anodize later" re-opens every press fit. Call finish and mask with the first upload.
What the Suzhou floor can actually hold
Put these on the RFQ only where the function needs them. Non-functional faces stay on the general class.
| Feature | Typical hold (suitable set-up) | RFQ note |
|---|---|---|
| Precision bore | 0.01 mm | Mark diameter + datum; say if after anodize |
| Positional | 0.02 mm | Needs datum frame on the PDF |
| General CNC sizes | ISO 2768 medium / fine band | See tolerance chart for size steps |
| Plastic CNC | Looser after stress relief | Say grade; expect more movement than metal |
| Vacuum-cast covers | Process-typical, not bore-class | Machine critical fits after cast if needed |
Band detail: CNC machining tolerance chart. Cost of each step tighter: ISO 2768 tolerance cost. China machine RFQ: CNC machining China.
From drawing pack to engineer reply
Lead-time bands by process: prototype lead times. Material still open? ABS vs PC vs aluminum.
Fit-critical aluminum housing
Five-face housing
CNC workshopRFQ tolerance FAQ for China CNC routes
Which RFQ tolerance guide for aluminum enclosure, CNC prototype, small-batch CNC and humanoid robot enclosure China?
This RFQ tolerance guide packs ISO 2768 class and fit-critical callouts for those metal programs. Open aluminum enclosure China, CNC prototype China, small-batch CNC China or humanoid robot enclosure China for the matching route, then Upload STEP on /contact/ (up to 2 files × 4 MB; usually one working day).
What tolerances should I put on a CNC prototype China RFQ?
Name a general class such as ISO 2768-mK for non-critical sizes, then call out only the fits that earn money — bores, datums, positions — with numbers. Blanket ±0.01 mm on every dimension inflates the quote without improving the part.
Is a STEP file enough for a firm China quote?
STEP gives geometry and stock size. A firm route still needs fit-critical tolerances on a PDF or a named ISO 2768 class, material grade, quantity, finish and date. Photos alone are not enough. Upload on /contact/ (2 files × 4 MB).
How tight can Everoyal hold on CNC from China?
Precision bores to 0.01 mm and positional tolerance to 0.02 mm on suitable features. Critical faces are measured on a Zeiss CMM; the report ships with prototype samples.
How does anodizing affect RFQ tolerances?
Roughly half the coating grows outward. Mask press fits, threads and electrical pads on the drawing, or size for growth. Finish type belongs on the same RFQ as the machining — anodizing China.
Which landing should I open for an aluminum enclosure China RFQ after reading this tolerance guide?
Open /services/aluminum-enclosure-china/ for enclosure-specific route language (billet CNC shells, anodize hand-off). Use this page for ISO 2768 class and fit callouts, then upload STEP on /contact/.
When should I choose CNC prototype China instead of only reading this RFQ tolerance guide?
Open CNC prototype China when you are ready to cut metal. Bring the general class and five tight dims from this guide so the prototype quote is comparable.
How does small-batch CNC China use the same tolerance packing list?
Open small-batch CNC China when quantity bands (for example 1 / 10 / 50 / 200+) need repeatable metal parts. Same ISO 2768 class and fit callouts keep first article and batch inspection aligned.
Can humanoid robot enclosure China programs reuse this RFQ tolerance guide?
Yes. Open humanoid robot enclosure China for shell RFQ language, then use this guide to name ISO 2768-mK once and number only the fits that earn money on joints and sealing faces.
Which service page should I open before a China manufacturer RFQ after reading this RFQ tolerance guide?
Pick the matching dedicated landing: aluminum enclosure China, CNC prototype China, small-batch CNC China, or humanoid robot enclosure China, then upload STEP on /contact/ (up to 2 files × 4 MB; usually one working day).
Where do I upload drawings for a China RFQ?
On the contact form — up to 2 files, 4 MB each (STEP, IGES or PDF). An engineer replies with route, DFM risks and quotation, usually within one working day. WhatsApp +86 138 2330 4476 and sales@everoyalprecision.com also work.
What Incoterm and quantity ladder belong beside the tolerance block?
Put quantity as 1 / 10 / 50 / 200+ and Incoterm as FOB / CIF / DDP on the same RFQ as ISO 2768 class and fit callouts so lead time and freight stay comparable.
Four new landings, tolerance helpers & RFQ → /contact
Aluminum enclosure China
Billet CNC shells — bring ISO 2768 class and mask faces from this guide.
CNC prototype China
Cut metal with the five tight dims already numbered.
Small-batch CNC China
Same packing list for 1 / 10 / 50 / 200+ metal bands.
Humanoid robot enclosure China
Shell RFQ; reuse ISO 2768-mK and joint fit callouts.
ISO 2768 tolerance cost
What each step tighter does to a China CNC quote.
CNC machining tolerance chart
Size-band detail beside this packing list.
Drawing package
STEP + 2D checklist that carries the tolerance block.
Contact / RFQ
Upload STEP (up to 2 files, 4 MB each) for a China factory quote.
Upload STEP — RFQ tolerance guide → /contact
Attach STEP, IGES or PDF on /contact/ (up to 2 files, 4 MB each). Include general tolerance class and fit-critical callouts. Rocky Chen replies with a process route, DFM risks and a quotation — usually within one working day. Route landings: aluminum enclosure, CNC prototype, small-batch CNC, humanoid robot enclosure.