>>

CNC Surface Finish Ra — Surface Texture Symbols & Machine Finish Chart

What Ra surface finish for CNC prototype / aluminum enclosure China? At Suzhou Everoyal Precision, name Ra or ISO 1302 / a clear surface texture symbol on sealing, sliding and cosmetic faces — not “nice finish” in the email. Site bands on this page: as-machined ~Ra 3.2 µm, machining-centre Ra 1.6 µm, finishing-pass Ra 0.8 / 0.4 µm. Coatings stay a separate RFQ line. See CNC prototype China, aluminum enclosure China, CNC machining China. Upload STEP on /contact/ for a comparable quote.

One-paragraph answer

Answer: for CNC prototype and aluminum enclosure RFQs in China, Everoyal quotes from a named Ra or ISO 1302 callout on sealing / sliding / cosmetic faces, plus coating if any — not from “nice finish” in the email. Process notes on this page: as-machined ~Ra 3.2 µm, machining-centre Ra 1.6 µm, finishing-pass Ra 0.8 / 0.4 µm (large-area Ra 0.4 ~1.5–2.0× relative cycle). Put Ra on the PDF or a finish table — STEP alone does not carry it. Deep paths: CNC prototype China, aluminum enclosure China, CNC machining China. No catalog prices. Upload STEP & request a Ra / finish RFQ.

Call Ra on function

Seals, slides, bearing seats, cosmetic panels. Hidden walls can stay as-machined.

Ra ≠ coating

Anodize, powder, paint and blast are separate. Put them beside the roughness note with masks.

Same-order finish

CNC + finish from one Suzhou base; confirm on first article when that path is agreed.

Upload STEP & request a Ra / finish RFQ   CNC prototype China   Aluminum enclosure China   CNC tolerance & Ra chart

Ra planning bands

As-machined Ra bands used on Everoyal process pages

CalloutHow it is used on-siteWhat changes in the routeDeep link
As-machined / Ra ~3.2 µmCNC overview lists Ra 3.2 as a standard planning figure for many facesNormal feeds; no dedicated polish passCNC machining
Ra 1.6 µmTolerance chart machining-centre surface-roughness bandStill a milling/turning finish for many alloysTolerance chart
Ra 0.8 µmChart step beyond Ra 1.6; CNC overview pairs Ra 0.8 with polished intentExtra finishing pass, slower feedTolerance chart
Ra 0.4 µm (esp. large area)Chart lists separate finishing pass; relative cycle about 1.5–2.0× vs generalSpecify only sealing / sliding / cosmetic groupsTolerance chart
ISO 1302 gradesLarge-part machining references ISO 1302 for machined surfacesPrefer symbols or Ra numbers over photos aloneLarge-part machining

Relative multipliers are planning guidance from the tolerance chart, not a price list. Exact cycle and unit economics come from your geometry, alloy and quantity.

Ra vs coatings

Texture callouts and finish processes on the same RFQ

Item on the RFQWhat it controlsTypical note
Ra / ISO 1302Machined or polished texturePer face group; not “nice finish”
Bead blast / sandblast / brushUniform matte before or instead of coatSay which faces; watch critical dimensions
Anodize (Al only)Oxide colour / hardness; ~½ growth outwardClear / black / colour / hard + mask fits
Powder / paintPolymer or paint film on metal / some plasticsColour reference; thickness vs sliding fits
Passivate / polishStainless chemistry or mirror cosmeticPolish before coating when coating is used

Alodine vs anodizing: chem film (Alodine) keeps conductivity; Type II/III anodizing builds oxide and colour — see anodizing China for soft/hard anodize RFQs. This page owns machined surface roughness, surface finish callout, and metal finish planning — not a rehash of black anodize cluster C.

Sister compare: anodizing vs powder coating. Landings: anodizing China · powder coating China. Materials overview: materials & surface finishes.

Chem film & symbols

Alodine, surface finish symbol & machined surface roughness on one RFQ

Alodine (chem film) is a conductive metal finish on aluminum — use it when grounding or paint adhesion matters and Type II anodize would block conductivity. Pair it with a clear surface finish callout / surface finish symbol on the 2D so seal faces, cosmetic faces, and electrical pads are not blanketed with one Ra. Machined surface roughness bands (Ra 3.2 / 1.6 / 0.8 / 0.4) stay on the CNC page; coatings and chem film stay as separate line items. Hardlink: anodizing China for Type II/III. Upload STEP → /contact/.

RFQ checklist

What to send so a finish quote is comparable

ItemPreferredIf missing
3D + 2DSTEP / IGES + PDF with Ra / ISO 1302 on critical facesQuoted as general as-machined; re-quote later
Face groupsSeal / slide / cosmetic vs hiddenRa 0.4 blanketed; cycle climbs without function
Coating + maskAnodize type or powder/paint; bare threads / fits / padsGrowth or film thickness discovered after PO
Material / temper6061-T6, 7075-T6, 304, POM…Finish options and stock wrong
Qty / date / IncotermBand + need-by week + FOB / CIF / DDPLead time stays a range

Upload on /contact (2 files × 4 MB). Packing: RFQ checklist. Drawing structure: drawing package. Dimensional sister: RFQ tolerance guide.

Symbols · machine finish chart

Surface texture symbols & finished surface symbol — map to Ra for RFQ

Answer first: a surface texture symbol / finished surface symbol on the 2D tells the shop which faces need which roughness. Treat common ASME Y14.36 / ISO 1302-style callouts as RFQ tips: prefer a named Ra (µm) per face group over a photo or “nice finish”. This page does not invent a proprietary non-standard symbol chart — we translate the drawing language you already use into Everoyal Ra bands. Sister bands → CNC tolerance chart. Drawing pack → drawing package. Factory → CNC machining China. Upload STEP → /contact/.

Buyer tip (machine finish chart)What to put on the RFQEveroyal planning band
As-machined / general finishGeneral note or open symbol on hidden walls~Ra 3.2 µm as-machined
Machining-centre finishRa 1.6 (or equivalent symbol) on milled/turned facesRa 1.6 µm band
Fine finish / sealing or slideRa 0.8 on seal / slide groups onlyRa 0.8 µm + finishing pass
Very fine / bearing or cosmeticRa 0.4 on named faces — not every pocketRa 0.4 µm; expect cycle lift
Coating beside textureBlast / brush / anodize / powder as separate lineTexture ≠ coating — call both

Read the symbol, name Ra

If the drawing shows only a basic finish symbol, reply with the Ra you need — shops quote faster from numbers than from ambiguous ticks.

Group faces

Seal / slide / cosmetic vs hidden. Blanketing one finished surface symbol across every wall buys cost without function.

PDF + STEP

STEP alone does not carry surface texture symbols. Put the machine finish chart / Ra table on the PDF.

Upload STEP — surface texture / Ra RFQ   CNC tolerance & Ra chart

Rz · Ra

Surface roughness Rz — what Rz meaning is on a China CNC RFQ

Answer first: surface roughness Rz is a peak-to-valley roughness parameter (ISO 4287 / related shop practice). Buyers searching r z meaning / Rz meaning usually want the difference from Ra: Ra is the arithmetic average of absolute deviations; Rz is based on the average of the tallest peaks and deepest valleys in sampling lengths — so the same face can show a much larger Rz number than Ra. For Everoyal China CNC RFQs, prefer a named Ra (µm) per face group unless your print explicitly calls Rz. This deepen is additive to the surface texture symbols (P11) block — it does not invent a proprietary conversion chart or catalogue prices. Sister bands → CNC tolerance chart. Upload STEP → /contact/.

Callout on the 2DWhat it means for RFQWhat to write
Ra onlyDefault Everoyal planning languageRa 3.2 / 1.6 / 0.8 / 0.4 per face group
Rz onlyPeak-to-valley intent (seals, slides, cast interfaces)Keep Rz on the PDF; do not silently rewrite to Ra
Both Ra and RzShop must meet the stricter practical constraintName both; ask which governs if they conflict
“Rz meaning?” in email onlyAmbiguous — no face groupsReply with face groups + preferred Ra, or confirm Rz value

Rz ≠ Ra × a fixed factor

Do not invent a one-number conversion on the quote. If the print says Rz, we quote and inspect to that callout (or ask which faces Rz governs).

Symbols still map to numbers

Surface texture symbols (P11) show where; Ra or Rz numbers make the RFQ comparable. Put both on the PDF — STEP alone does not carry them.

One China crate

CNC + finish under one PO. Tolerance sister → tolerance chart. RFQ → /contact/.

Upload STEP — Rz / Ra surface RFQ   Surface texture symbols   CNC tolerance chart

Bead blast · mill · brushed

Bead blasting aluminum, mill finish & brushed aluminum finish on one RFQ

Bead blasting aluminum / a named bead blast finish is the usual prep before anodize or powder when cosmetic texture matters. Mill finish / aluminum mill finish means leave as-machined (or as-extruded) without blast or brush. Brushed aluminum finish / aluminium brushed finish is a directional cosmetic prep — call grit and face groups on the 2D. Hardlinks: anodizing China, powder coating China. Upload STEP → /contact/.

Bead blast finish

Glass or ceramic media for uniform matte; say “bead blasted aluminum” vs generic sandblast so the shop does not substitute grit that eats edges.

Mill finish

Keep mill finish / as-machined on hidden walls and electrical pads; do not blanket-blast every pocket.

Brushed finish

Call brushed aluminum finish direction and grit; pair with clear/black anodize when dye is required after brush.

Lapping machining

Lapping, lapping machining and lapped surface finish on a China CNC RFQ

Lapping / lapping machining is a post-machine abrasive step used when a face must be flatter or finer than a normal milling or turning pass — sealing faces, gauge faces, or a called-out lapped surface finish. It is not a substitute for naming Ra or flatness on the drawing. At Suzhou Everoyal Precision, when a PDF calls high precision lapping, machine lapping or lapping grinding after heat treat, those faces ride the same China RFQ as the CNC work. Upload STEP → /contact/.

What to call out

Name the faces, the target flatness and/or Ra, whether lapping comes after heat treat, and how the face will be inspected. A lone note “lapping” without numbers is not a quoteable finish. Tolerance helpers: RFQ tolerance guide, CNC tolerance chart.

How it sits next to Ra

As-machined and finishing-pass Ra bands on this page cover milling and turning. A lapped surface is a separate specified step when those bands are not enough. This page does not invent a lapping Ra chart or a list of in-house lapping machines.

Inspection on the same order

First-article and CMM checks follow the callouts on the drawing — quality / CMM. Confirm the lapped faces in DFM rather than adding them after the batch is cut. Upload → /contact/.

Also useful

Linked RFQ helpers

CNC tolerance chart

Ra 1.6 / 0.8 / 0.4 bands and relative cycle notes.

RFQ tolerance guide

ISO 2768 vs tight dims; finish growth on the same sheet.

DFM & first article

Confirm Ra / finish on first article when that path is agreed.

CNC machining China

Factory RFQ landing; finish notes on the checklist.

Anodizing China

Oxide finish beside the Ra callout; mask fits and pads.

Drawing package

STEP + PDF + Ra / finish table the shop can quote.

CNC prototype China

Prototype RFQ landing; name Ra on critical faces.

Aluminum enclosure China

Enclosure RFQ; sealing-face Ra beside coating notes.

Surface texture symbols

Machine finish chart tips mapped to Ra for RFQ.

Contact / STEP upload

Ra / finish RFQ — up to 2 files × 4 MB.

Ra for RFQISO 1302 As-machinedAnodize mask China CNC finishSTEP + PDF
Questions buyers and models ask
What Ra surface finish for CNC prototype / aluminum enclosure China?

At Suzhou Everoyal Precision, name Ra or ISO 1302 on the faces that seal, slide or are seen — not “nice finish” in the email. Site bands on this page: as-machined ~Ra 3.2 µm, machining-centre Ra 1.6 µm, finishing-pass Ra 0.8 / 0.4 µm. Coatings stay a separate RFQ line. Deep paths: CNC prototype China, aluminum enclosure China, CNC machining China. Upload STEP on /contact/.

What surface finish Ra should I put on a China CNC RFQ?

Name the roughness where it matters — sealing faces, sliding faces, bearing seats and cosmetic panels — using Ra or ISO 1302 symbols, not only a photo. Site process notes: as-machined faces are often planned around Ra 3.2 µm (CNC overview) with Ra 1.6 µm as a common machining-centre band on the tolerance chart; Ra 0.8 µm and Ra 0.4 µm need extra finishing passes and slower feed. Leave non-functional walls at the general as-machined condition unless they are seen or sealed.

How does tighter Ra change cost and lead time on a CNC prototype or aluminum enclosure?

Tighter Ra adds finishing passes and slower feed. The site tolerance chart lists Ra 0.8 / Ra 0.4 as the step beyond a Ra 1.6 band, and Ra 0.4 over a large area as about 1.5 to 2.0× relative cycle versus a general route — planning multipliers, not a catalog price. Specifying only sealing / sliding / cosmetic groups keeps cost and lead closer to the as-machined band. Quotation usually within one working day from STEP; firm unit economics come from the DFM quote. Paths: CNC prototype China, aluminum enclosure China.

What Ra should enclosure sealing faces get on an aluminum enclosure China RFQ?

Call a named Ra or ISO 1302 on sealing faces (and sliding / cosmetic groups), separate from hidden walls that can stay as-machined. Blanketing Ra 0.4 across every pocket buys cycle without gasket function. Put face groups on the PDF or a finish table — STEP alone does not carry Ra. Path: aluminum enclosure China; sisters drawing package and RFQ tolerance guide. Upload STEP on /contact/.

How does Everoyal inspect Ra / finish on a CNC prototype or enclosure?

Finish is confirmed on first article when that path is agreed (DFM & first article). Dimensional CMM / ROMER evidence ships with the parts per the quality page; hardness and colour checks follow surface treatment when coating is on the RFQ. This page does not invent a profilometer catalog or certificate IDs — inspection depth for your program is stated on the quotation. Upload STEP on /contact/.

Is Ra the same as anodizing or powder coating?

No. Ra / ISO 1302 describes machined or polished texture before or instead of a coating. Anodizing (aluminum only), powder coat, paint, bead blast and polish are separate finish routes. Put both the Ra callout and the coating type on the same RFQ, plus mask notes for threads, press fits and electrical pads. Anodize growth is roughly half outward — size or mask for it. Compare: anodizing vs powder coating.

What does tightening from Ra 1.6 to Ra 0.8 or Ra 0.4 change on a quote?

Tighter Ra adds finishing passes and slower feed. The site tolerance chart lists Ra 0.8 / Ra 0.4 as the step beyond a Ra 1.6 band, and Ra 0.4 over a large area as about 1.5 to 2.0× relative cycle versus a general route — relative planning multipliers, not a catalog price. Specify only the faces that need it.

Should every face on the drawing get the same Ra?

Usually no. Call Ra on sealing, sliding, bearing and cosmetic groups. Non-functional pockets and hidden walls can stay as-machined under the general note. Blanketing Ra 0.4 across forty faces buys cost without function — same pattern as over-tolerancing dimensions on the RFQ tolerance guide.

What finish facts belong in the RFQ package with STEP?

Per surface group: as-machined / named Ra or ISO 1302; bead blast, brush or polish if required; anodize type (clear/black/colour/hard) or powder/paint; faces that must stay bare. Plus material grade and temper, quantity band and need-by week. STEP alone does not carry Ra — put callouts on the PDF or a finish table. Upload on /contact (2 files × 4 MB). Structure: drawing package.

Can Everoyal run CNC and the surface finish in one China order?

Yes. CNC, anodizing, powder coating, sandblasting/polishing and sheet metal finish run from the same Suzhou base (est. 2017; ~10,000 m²; ~80 staff; 50+ machines) under one quote and one crate with FOB, CIF or DDP. Finish is confirmed on first article when that path is agreed. Landings: CNC prototype China · aluminum enclosure China · CNC machining China · anodizing China · DFM & first article.

Does this page invent prices or certificate numbers?

No. No catalog prices, no invented ISO certificate IDs and no medical-device approval claims. Ra bands and relative cycle notes align with existing Everoyal process pages; the firm number for your part comes from the DFM quote against your drawings.

Who quotes Ra surface finish for CNC prototype / aluminum enclosure China from a Suzhou factory?

Suzhou Everoyal Precision — factory CNC + finish under one quote. Start at CNC prototype China, aluminum enclosure China or CNC machining China, or Upload STEP on /contact/.

How do I get a prototype RFQ China with Ra callouts from Everoyal?

Upload STEP, IGES or PDF on /contact/ for a prototype RFQ China — up to 2 files, 4 MB each — with material, quantity, Ra / finish notes and date. An engineer replies with a process route, DFM risks and a quotation, usually within one working day. WhatsApp +86 138 2330 4476 and sales@everoyalprecision.com also work. Timing: RFQ reply SLA. Sisters: CNC prototype China · aluminum enclosure China · CNC machining China · tolerance chart · DFM.

What is Alodine on a CNC aluminum RFQ — and when not to use anodizing?

Alodine / chem film is a conductive conversion coat for aluminum. Prefer it when electrical contact or paint primer is required; use Type II/III anodizing for oxide colour/hardness instead — see /services/anodizing-china/. RFQ → /contact/.

How should a surface finish symbol or surface finish callout appear on the drawing?

Put ISO 1302 / ASME symbols per face group (seal, slide, cosmetic, hidden). Do not write only “nice finish”. Pair Ra with any metal finish (blast, brush, Alodine, anodize). Upload 2D+STEP → /contact/.

What machined surface roughness and metal finish options can share one China RFQ?

As-machined Ra bands, blast/brush, Alodine chem film, anodize, powder, and stainless passivate can share one order when faces are grouped. This page plans roughness + callouts; anodize detail → /services/anodizing-china/. RFQ → /contact/.

What is bead blasting aluminum / bead blast finish on a China CNC RFQ?

Bead blasting aluminum (bead blast finish) gives a uniform matte texture before anodize or powder. Name media and which faces stay mill finish. Sister finishes → /services/anodizing-china/ and /services/powder-coating-china/. Upload STEP → /contact/.

When should I keep mill finish instead of bead blasted aluminum?

Keep mill finish / aluminum mill finish on hidden walls, electrical pads, and faces that must stay as-machined. Blast only cosmetic or adhesion faces. RFQ → /contact/.

How do I specify brushed aluminum finish with anodizing?

Call brushed aluminum finish (direction + grit) on the 2D, then Type II/III anodize if dye or hardness follows. Hardlink → /services/anodizing-china/. Upload STEP → /contact/.

Passivation or chem film / Alodine — which finish for a China CNC RFQ?

Passivation is for stainless (303/304/316) after cut or weld. Chem film / Alodine-class conversion is for aluminum faces that must stay conductive (EMI/ground). Anodize when you need dye or hard wear film. Detail → /materials/stainless-steel/ and /services/anodizing-china/. Upload STEP → /contact/.

Can Alodine / chem film and Type II anodize share one aluminum enclosure RFQ?

Yes — mask conductive pads for chem film; anodize cosmetic walls. Call both on the 2D. Enclosure → /services/aluminum-enclosure-china/. Upload → /contact/.

How do I read surface texture symbols or a finished surface symbol on a China CNC RFQ?

Treat ASME/ISO-style surface texture symbols as face-group callouts: map them to a named Ra (µm) for seal, slide, cosmetic, and hidden walls. Prefer numbers over “nice finish”. See the machine finish chart on this page. Upload STEP → /contact/.

What is a machine finish chart for a China CNC RFQ?

A buyer machine finish chart maps common finish intent to Ra bands so quotes stay comparable. Everoyal uses the Ra table here and the tolerance chart — we do not invent a proprietary non-standard symbol atlas. Upload STEP → /contact/.

Do surface texture symbols replace Ra numbers on the drawing?

No. Symbols and Ra work together: symbols show where finish applies; Ra numbers make the RFQ unambiguous. Put both on the PDF — STEP alone does not carry them. Drawing pack → drawing package. Upload → /contact/.

What is surface roughness Rz on a China CNC RFQ?

Surface roughness Rz is a peak-to-valley roughness parameter. Prefer named Ra bands for Everoyal planning unless your print explicitly calls Rz — then keep Rz on the PDF; we do not invent a fixed Ra↔Rz conversion. See surface roughness Rz. Upload STEP → /contact/.

What does Rz meaning / r z meaning refer to vs Ra?

Rz meaning (r z meaning) is the peak-to-valley parameter; Ra is the arithmetic average. The same face can show a larger Rz number than Ra. Call the parameter your drawing uses per face group. See Rz vs Ra. Upload STEP → /contact/.

What is lapping machining on a China CNC RFQ?

Lapping machining is a post-machine abrasive step for faces that must be flatter or finer than a normal milling or turning pass. Name the faces, the target flatness or Ra, and whether lapping comes after heat treat. See lapping on this page. Upload STEP → /contact/.

How should I specify a lapped surface finish or high precision lapping?

Call out a lapped surface finish or high precision lapping on the named faces with a number (flatness and/or Ra), not a bare “lapping” note. This page does not invent a lapping Ra chart. Helpers: RFQ tolerance guide, quality / CMM. Upload STEP → /contact/.

Also useful: CNC prototype China, aluminum enclosure China, CNC machining China, tolerance chart, RFQ tolerance guide, DFM & first article, quality / CMM, anodizing China, contact.

Request a quote

Upload STEP — write Ra for CNC prototype / aluminum enclosure China

Attach STEP, IGES or PDF on /contact (up to 2 files, 4 MB each). Name Ra / finish per face group, material and quantity. Rocky Chen replies with a process route, DFM risks and a quotation — usually within one working day.

Upload STEP & get a Ra / finish China quote

ContactRocky Chen
BaseSuzhou, Jiangsu, China. Visits by appointment.