Magnesium CNC Machining China — AZ31 / AZ91 RFQ
Magnesium CNC machining China for AZ31 / AZ91 lightweight billet parts — when aluminum still feels heavy. Controlled dry/MQL cutting, conversion-coat notes, factory RFQ (not a trading desk). Then open CNC machining China or CNC prototype China and Upload STEP on /contact/.
Updated 2026-11-07 · Google cluster P4 G1 magnesium CNC / AZ31 AZ91 · Google gap P5 FAQ deepen · SERP observation (no Semrush Vol) · See materials hub, process
Answer: Magnesium CNC machining China at Suzhou Everoyal is for lightweight AZ31 / AZ91 parts when aluminum still feels heavy — covers, brackets and instrument housings that need billet accuracy without a casting tool. Magnesium chips need controlled dry or MQL cutting and Class-D awareness; we do not pretend every bay is Mg-ready without saying so on the quote. Route: this page for grade + safety notes → CNC machining China → Upload STEP on /contact/.
When magnesium beats aluminum on a China RFQ
| Need | Prefer | Why |
|---|---|---|
| Lowest mass cover / bracket | AZ31B billet CNC | ~2/3 the density of aluminum; good specific stiffness for non-structural skins |
| Die-cast look without tooling | AZ91 CNC from plate/bar | Prototype geometry before committing to die cast |
| Cosmetic anodize / dye | Aluminum 6061/7075 | Mg conversion coatings exist; Type II dye aesthetics stay easier on aluminum |
| Food / wet corrosion without coating | Stainless or coated Al | Bare magnesium corrodes; plan conversion coat or paint |
SERP observation (2026-11-07 Asia/Shanghai): dedicated China Mg pages (hxcnc, hokmetal, saberalloy, xap) and competitor nav (jctop / qinmo) already target this angle — Everoyal lacked a materials landing until this P4 page.
AZ31 vs AZ91 on the drawing
- AZ31B — wrought plate/sheet; machines cleaner for covers and brackets; name temper if known.
- AZ91 / AZ91D — cast-alloy chemistry often cut from billet for prototypes; slightly higher strength; watch corrosion + finish.
- Say density intent. If the only goal is “lighter than 6061”, state the mass budget so DFM can push wall thickness instead of forcing Mg when Al + pocketing is enough.
- Finish early. Conversion coating, paint or plating must be on the RFQ — bare Mg tarnishes and corrodes in humid crates.
Cutting magnesium safely (what we put on the quote)
- Chip control. Fine, dry chips are a fire risk; we plan dry or MQL routes, chip collection and Class-D extinguisher access — not flood coolant the way aluminum runs.
- Sharp tooling, moderate speed. Rubbing heats chips; light finishing passes beat aggressive rubbing.
- No mystery “same as aluminum” cycle time. Fixture and chip handling dominate the schedule — the RFQ reply names that.
- We decline when the bay is wrong. If a job needs a process we cannot run safely this week, the engineer says so before deposit.
Finishes that belong on a magnesium RFQ
| Finish | Role | RFQ note |
|---|---|---|
| As-machined | Internal / short life samples | Expect oxidation in humid air |
| Conversion coating | Corrosion barrier / paint base | Name standard if you have one |
| Paint / powder | Cosmetic + barrier | Mask fits; call colour |
| Specialist Mg treatments | Lab-dependent | Confirm availability before locking FAI |
Aluminum Type II/III → anodizing China. Stainless passivation → stainless steel. Chem film / Alodine for aluminum EMI pads → CNC surface finish Ra RFQ.
What to upload for a magnesium China RFQ
- STEP/IGES + PDF with critical dims
- Grade (AZ31B / AZ91…) and temper if known
- Finish / conversion coat / paint callout
- Quantity band and need-by date
- Whether aluminum is an acceptable alternate if Mg stock or finish lead time slips
Upload on /contact/. Sisters: CNC prototype China, small-batch CNC China, aluminum, materials hub.
Magnesium CNC machining China FAQ
Do you offer magnesium CNC machining China for AZ31 / AZ91?
Yes — billet magnesium CNC machining China for AZ31 / AZ91-class parts when mass beats aluminum. We quote dry/MQL chip control and finish/conversion needs up front. Upload STEP on /contact/.
Is magnesium CNC safer than aluminum CNC?
Chips need more care: dry or MQL, collection, Class-D awareness. We do not run Mg like flood-cooled aluminum. If the bay is not ready, the engineer says so before deposit.
When should I keep aluminum instead of magnesium?
Keep 6061/7075 when you need Type II/III dye anodize cosmetics, food/wet service without specialist coatings, or when pocketing aluminum already hits the mass budget. Aluminum hub → /materials/aluminum/.
Can magnesium parts share an RFQ with aluminum enclosures?
Yes. Name both grades on one STEP pack. Enclosure path → aluminum enclosure China; Mg stays on this page. Upload → /contact/.
What makes magnesium CNC machining China different on an RFQ?
Magnesium CNC machining China quotes must call dry/MQL chip control, Class-D awareness and conversion-coat needs up front — unlike flood-cooled aluminum. If the bay is not ready, the engineer says so before deposit. Upload STEP on /contact/.
Where do I send a magnesium prototype RFQ?
Open CNC prototype China for metal-first timing, keep grade notes here, then Upload STEP on /contact/ — usually one working day.
Magnesium or aluminum — Upload STEP on /contact/
Name AZ31/AZ91 (or say aluminum is OK as alternate). Rocky Chen replies with a process route and quotation — usually within one working day.