Aluminum Machining and Parts Manufacturing

Which materials/aluminum page for aluminum enclosure, CNC prototype, small-batch CNC and humanoid robot enclosure China? This page covers 6061, 7075 and 5052 grade behaviour and anodizing fit notes for those metal programs. Open aluminum enclosure China, CNC prototype China, small-batch CNC China or humanoid robot enclosure China, then Upload STEP on /contact/ — usually one working day.

Upload STEP & start China factory RFQ

Updated 2026-11-15 · Semrush cluster P24 · 6061 vs 6063 · prior Semrush cluster B aluminum materials flank · Google gap P5 Al↔Ti hardlink.

Answer first — aluminum grades for China CNC: Most enclosure and housing programs start on 6061 / 6061-T6; step up to aluminum 7075 / 7075-T6 when yield must stay high in thin sections. Use the 7075-T6 vs 6061-T6 compare for the decision, then Upload STEP on /contact/.

6061, 7075 (aa7075) and 5052: pick by function

GradeStrength and useMachining note
6061-T6General structure, brackets, housingsMachines cleanly, anodizes well, welds well. The default.
6063-T5 / T6Extrusions, architectural profiles, cut-down framesMachines, but not a silent swap for a milled 6061 housing. See 6061 vs 6063.
7075-T6High-strength parts, thin load pathsStronger but less corrosion resistant; anodize with care, avoid sharp internal corners
5052Formed panels, covers, ductingBest forming grade; not the one to machine a precision bore into
5083Marine and welded structuresTough, gummy to machine, welds well

The mistake that recurs: a part designed as a folded panel in 5052 and then asked to hold a precision bore. 5052 forms beautifully and machines poorly. Where a single part has to do both, splitting it into a formed cover and a machined insert is usually cheaper than forcing one grade.

6061 vs 6063 aluminum — extrusion vs CNC plate

The difference between 6061 and 6063 aluminum is not the same fork as 7075 vs 6061. That compare lives on 7075-T6 vs 6061-T6. 6061 vs 6063 is usually a process question: milled plate or billet (6061-T6, the default on this page) versus a profile or cut-down extrusion (often 6063, with the temper written as T5 or T6).

6063 is the common architectural extrusion alloy. It machines, and it often anodizes evenly on a profile, but it is not a silent substitute for a heavily pocketed 6061 housing. If a supplier offers 6063 for a part you designed as a milled enclosure, say so on the RFQ — the stock form (extrusion vs plate vs billet) changes fixturing, leftover wall, and whether a bore can hold a press fit.

Write the alloy and temper on the print (6061-T6, 6063-T5, 6063-T6, or the actual extrusion spec). If the part starts as an extrusion that we then mill, pocket and tap, send the profile standard or a short note plus the STEP. 5052 stays the forming-sheet grade in the table above; it is not a third alias for 6063. Upload STEP on /contact/ for a factory quote.

What aluminum does under the cutter

  • It moves with temperature. Aluminum expands about twice as much as steel per degree, so a metre-long part measured in the morning is a different length in the afternoon. Tight callouts on long parts have to be referenced to a temperature, or the design needs adjustment.
  • It is soft enough to gall. Built-up edge on the tool marks the surface and dulls the finish, which is why aluminum runs with high rake, generous coolant and sharp tooling rather than more force.
  • Thin walls deflect before they cut. A 1 mm wall will spring away from the cutter and then come back oversize. Supporting the wall with fixturing or leaving it for a finishing pass is the answer, not a slower feed.

Anodizing changes the fit, not the size on the drawing

Anodizing grows into the surface as well as onto it: roughly half the coating thickness is consumed substrate and half is added. A 20 micrometre coating adds about 10 micrometres to a dimension, which is enough to close a light press fit and not enough to matter on a clearance hole.

FeatureWhat to do before anodizing
Press or transition fitAllow 0.01 to 0.02 mm; or mask the bore
ThreadsMask, or specify a thread class that tolerates the coating
Electrical contact facesMask; anodizing is an insulator
Cosmetic facesSpecify the finish before polishing, because polishing after coating is not possible

Hard anodizing is thicker and harder, in the 25 to 50 micrometre range, and it changes dimensions enough that any tight feature should be masked rather than compensated for.

Aluminum in a robot program

Most robot structures here are 6061: frames, joint housings, brackets and internal mounts. 7075 appears where a load path has to be thin. Covers move to vacuum casting or molding once the volume arrives, and the machined aluminum version becomes the master pattern rather than the shipped part.

That transition is worth designing for. A cover modeled for machining at 3 mm can usually mold at the same wall, but a machined cover with a thick boss in the middle will sink when it is cast or molded, so the boss is better designed as a separate bonded insert from the start.

Specifying an aluminum part on the drawing

  • Temper as well as grade. 6061-T6 and 6061-T4 machine and behave differently. T6 is the default for structural parts; say so rather than leaving it to the shop.
  • Anodize type and colour. Clear, black and coloured anodizing all need the finish specified before polishing, because polishing after coating is not possible.
  • Masking. Threads, press fits and electrical contact faces need masking, and masking is quoted as an operation rather than absorbed.
  • Flatness reference. On a large thin part, state which face is the datum. Without it, a flatness callout cannot be measured consistently and the part is argued about rather than accepted.

Where a part is both machined and anodized, the sequence matters: machine, deburr, anodize, then mask anything that must stay conductive. A part anodized before a final bore is cut loses its coating on that bore, and the finish spec has to be re-applied.

Also useful: soft vs hard anodizing, aluminum vs stainless China CNC, aluminum vs titanium CNC, 7075 T6 vs 6061 T6, aluminum machining China, anodizing China, prototype materials comparison.

FAQ

Aluminum materials for China factory RFQs

Which materials/aluminum page for aluminum enclosure, CNC prototype, small-batch CNC and humanoid robot enclosure China?

This materials/aluminum page covers 6061, 7075 and 5052 grade behaviour and anodizing fit notes for those metal programs. Open aluminum enclosure China, CNC prototype China, small-batch CNC China or humanoid robot enclosure China, then Upload STEP on /contact/ (up to 2 files × 4 MB; usually one working day).

Which aluminum grade is best for robot frames?

6061-T6 for most frames and housings: it machines cleanly, anodizes well and welds. 7075 only where the load path has to be thin, because it is stronger but less corrosion resistant and harder to anodize.

Does anodizing change the dimensions of a machined part?

Slightly. Roughly half the coating grows outward, so a 20 micrometre coating adds about 10 micrometres. Mask press fits, threads and electrical contact faces rather than compensating dimensions.

Why does my long aluminum part measure differently in the morning?

Thermal expansion. Aluminum moves about twice as much as steel per degree, so a metre-long part changes length measurably over a workshop day. Reference tight callouts to a temperature, or design in adjustment.

Can you supply aluminum parts anodized in colour?

Yes. Anodizing, including coloured finishes, runs in the same order as the machining, with masking specified at quoting rather than after the parts are made.

Which landing should I open for an aluminum enclosure China RFQ after reading this aluminum materials page?

Open /services/aluminum-enclosure-china/ for enclosure-specific route language (billet CNC shells, anodize hand-off). Use this page for 6061/7075 grade and masking notes, then upload STEP on /contact/.

How does a CNC prototype China job use the aluminum grades on this page?

Start on /services/cnc-prototype-china/, pick 6061-T6 unless a thin load path needs 7075, then Upload STEP on /contact/. Grade behaviour and anodizing fit notes on this materials page still apply to the prototype quote.

How do I route a small-batch CNC China RFQ in aluminum after a prototype?

Open /services/small-batch-cnc-china/ after prototype sign-off, keep the same temper and anodize / mask notes from this page, then upload the STEP package on /contact/.

Can humanoid robot enclosure China metal shells use the aluminum grades covered here?

Yes. Most shells and frames here are 6061; 7075 appears on thin load paths. Open /services/humanoid-robot-enclosure-china/ for shell-specific language, then Upload STEP on /contact/.

Which service page should I open before a China manufacturer RFQ after reading this aluminum materials page?

Pick the matching dedicated landing: aluminum enclosure China, CNC prototype China, small-batch CNC China, or humanoid robot enclosure China, then upload STEP on /contact/ (up to 2 files × 4 MB; usually one working day).

How do I start a China factory RFQ for an aluminum part with Everoyal?

Upload STEP, IGES or PDF on /contact/ — up to 2 files, 4 MB each — with grade/temper, quantity, anodize type and need-by date. An engineer replies with process route, DFM risks and quotation, usually within one working day.

Do you publish ISO, IATF or AS9100 certificates on this aluminum materials page?

No. This page covers grade behaviour and anodizing fit only. We do not invent certificates here. Ask on /contact/ for the quality evidence that matches your program; metrology detail lives on quality.

Which aluminum grade should I put on a China CNC enclosure RFQ — 6061 or 7075?

Default 6061-T6 for billet CNC enclosures and housings. Move to 7075-T6 when the load path forces thinner walls. Decision detail → 7075-T6 vs 6061-T6. RFQ → /contact/.

Do you machine aluminum 7075 and 6061 on the same China factory path?

Yes. Everoyal machines aluminum 7075 and 6061 (and common plate/sheet grades) on the Suzhou CNC floor. Call temper, finish and critical dims on one RFQ. Service → aluminum machining China.

What is the difference between 6061 and 6063 aluminum on a China CNC RFQ?

6061-T6 is the default structural CNC plate or billet grade on this page. 6063 is usually an extrusion or cut-down profile, often chosen when the part starts as a standard section and is then milled. It is not the same decision as 7075 vs 6061. Write the temper and the stock form on the print, then see 6061 vs 6063. Upload STEP on /contact/.

Should I specify 6063 or 6061 for a machined aluminum enclosure?

For a heavily pocketed billet or plate enclosure, start with 6061-T6 unless your print already calls 6063. Do not accept a silent 6063 substitution on a 6061 housing. If the cover really is a cut-down extrusion, call 6063 (or the actual profile alloy) and the machining that follows. Upload STEP on /contact/.

China factory RFQ

Upload STEP — aluminum grade + finish on /contact

Rocky Chen replies with a process route, the tolerance risks we see in your data and a quotation — usually within one working day. Bring grade/temper and anodize / mask notes from this page. Route-specific landings: aluminum enclosure, CNC prototype, small-batch CNC, humanoid robot enclosure.

Upload STEP & start China factory RFQ

ContactRocky Chen
BaseSuzhou, Jiangsu, China. Visits by appointment.
China RFQ

Quote machining and anodizing together

Choosing aluminum vs stainless first? See aluminum vs stainless China CNC. Within aluminum grades: 7075 T6 vs 6061 T6. For a factory quote with finish and mask notes on the same order, use the aluminum machining China RFQ landing (CNC + anodize) or the anodizing China RFQ (STEP upload on /contact/). Grade behaviour above still applies. Dedicated landings for enclosure / prototype / small-batch / humanoid shell RFQs: aluminum enclosure China, CNC prototype China, small-batch CNC China, humanoid robot enclosure China.

Upload STEP on /contact/   Aluminum enclosure China   CNC prototype China   7075 T6 vs 6061 T6   Anodizing China RFQ