What a 100,000-Unit Humanoid Forecast Means for an Enclosure RFQ

Complete-machine output is rising. A shell, joint housing or frame RFQ is still usually a pilot or small-batch package — not a reason to cut a progressive die.

On 19 October 2026, China’s Ministry of Industry and Information Technology (MIIT) said that in the first half of 2026, complete-machine humanoid robot products in China exceeded 400 models and output exceeded 40,000 units, with full-year output expected to exceed 100,000 units. Those figures count complete machines. They do not tell you which process should make a torso shell, a joint housing or a frame, or whether that geometry is stable enough for hard tooling.

For an enclosure RFQ, the useful question is still this: is the design still changing, or has it earned a steel tool? Most shell, housing and frame packages in this window are still pilot or small-batch work.

What MIIT actually said

The comments came from Wei Wei, Director-General of MIIT’s Department of Science and Technology, at a State Council Information Office briefing on 19 October 2026. The official transcript was posted the next day. China News Service carried the same unit counts the same afternoon.

Besides the unit figures, MIIT said it is running a practical-training program that is pushing humanoid and embodied-AI products into more than 300 key scenarios in warehousing and logistics, food retail and home services. It also said it would issue the National Humanoid Robot Industry Standards System Guide (2026 edition). A draft of that guide was posted for public comment on 24 August 2026, with the comment window running from 25 August to 23 September 2026. As of 17 November 2026, this article does not treat a final edition as already in force.

A listed cover supplier is still in small-batch

Unit headlines can be read as if covers and structures were already on automotive-style hard tools. One public data point says otherwise.

In its 2026 half-year report, Jiangnan Mould Plastics Technology (模塑科技, stock code 000700) said it was moving into humanoid-robot outer covers by reusing automotive-exterior capabilities in large-part injection moulding, toolmaking, painting and lightweight materials. It reported technical discussions, sample development and sample validation with several complete-machine makers, and small-batch trials on existing injection-moulding and painting lines. It also stated that it had only received small-batch purchase orders for robot outer covers, that those orders accounted for less than 0.1% of operating revenue, and that the effect on results was minimal.

That is one listed supplier, not a market total. Even a company already running automotive exterior lines still describes this work as sample validation and small-batch trial.

Split the RFQ by what each part has to do

A humanoid enclosure program is rarely one part. It is usually several families with different jobs, and they should not share one process by default. That split is already how we describe the work on our humanoid robot enclosure and robotics pages.

  • Shells and covers carry appearance. When the surface and color have to match across a lot, a machined master and a soft tool, or a painted or anodized CNC shell, is often the right first route. The geometry has not always earned a steel tool yet.
  • Joint housings carry bearings. These are tolerance parts, typically machined in aluminum, with precision bores held to 0.01 mm.
  • Frames and brackets carry load and services. Thin, constant-gauge panels often belong on sheet metal. Thick load paths, pockets and multi-face datums often belong on CNC from plate or billet.

If those families arrive in one ZIP with one process named on the email, the quote will either guess or come back as a range. Name the job of each part, then pick the route.

Do not let a volume headline pick the tool

Buyers sometimes write “stamping” when they mean a laser-cut and bent panel, and shops hear a progressive die. Those are not the same route. As we set out in sheet metal stamping versus machining for robot structural parts, prototype and small-batch robotics almost always use blanking, punching and press-brake forming without a progressive die. Hard tooling pays when the annual volume and the frozen geometry can amortize it.

A 100,000-unit complete-machine forecast for the whole country does not freeze one program’s cover or bracket. If the cut-outs, fastener pattern or bearing stack is still moving, CNC or a soft fabrication route will usually waste less time and less tool cost than a die you will revise twice.

The drawing package has to survive the next revision

Pilot programs change. The RFQ package has to make the live revision obvious.

A complete pack is a STEP (one part per file), a 2D PDF for fit-critical dimensions or a named ISO 2768 class, material and temper, finish and mask notes, quantity, and the same revision on every file. That list is already on our drawing package page. Two control rules matter more than usual in this window:

  • Send a short document register so the STEP, the PDF and any notes show the same change.
  • When the 2D drawing and the STEP disagree on a dimension, hole or cut, the 2D drawing governs unless you write a different order of precedence on the RFQ.

A mismatched revision (PDF at Rev C, STEP still at Rev B) should pause the quote, not be resolved by guesswork on the shop floor.

Materials follow the job, not the headline

Aluminum remains the default for many machined housings and billet shells. Sheet aluminum or steel is the usual stock for formed covers and frames. When a drawing calls for PEEK bushings, flanges or insulators, those can be CNC-machined on the same inspection chain as the metal parts — see PEEK machining and the robot shell materials guide.

Name the grade on the drawing. Do not leave the shop to substitute a cheaper polymer or a different temper to hit a price.

Inspection has to travel with the first article

On a housing with 0.01 mm precision bores, a first-article dimensional report is part of the delivery, not a follow-up email. At the Suzhou plant we inspect those fits on a Zeiss CMM and ship the report with the parts. The factory is a single base of about 80 people and 50+ machines — facts already published on our facilities and at-a-glance pages.

That does not replace incoming inspection. The RFQ should still name the datums, the bores, and which document comes with the crate.

What to send now

If you are quoting a humanoid or service-robot shell, housing or frame in this pilot-to-small-batch window, send the live revision, not a volume target. Attach the STEP and the 2D drawing, name the material and quantity, and say which file governs if they ever disagree.

Upload the pack on https://everoyalprecision.com/contact/.

Sources cited in this article

Also useful: robotics, humanoid robot enclosure China, drawing package, stamping vs machining, contact / Upload STEP.

Start a program

Send the live revision, not a volume target

Upload the STEP and the 2D drawing, name the material and quantity, and say which file governs if they ever disagree.

Upload STEP on /contact/

ContactRocky Chen
BaseSuzhou, Jiangsu, China. Visits by appointment.