The Complete Guide to Custom Sheet Metal Fabrication for Robot Enclosures

How laser cut, brake-formed and welded sheet metal builds robot panels, frames and brackets — and what to put on the drawing before you send a China RFQ.

Custom sheet metal fabrication is the default route for many robot enclosure programs because most of the geometry is panels, flanges, frames and brackets that a laser and a press brake can make without soft tooling. This pillar walks through the process stack we use at Suzhou Everoyal Precision Co., Ltd., where sheet metal sits beside CNC, vacuum casting, rapid tooling, 3D printing and anodizing — not die casting, and not medical-device work.

What “custom sheet metal fabrication” means on a robot build

On a humanoid or industrial robot, sheet metal usually covers four part families:

  • Outer and inner panels — access doors, side skins, belly covers, EMI shields.
  • Welded or riveted frames — base frames, torso cages, equipment bays that hold stiffness better than a plastic shell.
  • Brackets and mounts — sensor plates, harness clips, battery trays, cable glands.
  • Decorative or functional laser-cut panels — vent patterns, logos, light windows, perforated heat shields.

The process chain is usually: nest and laser (or turret punch) → deburr → press-brake form → hardware install (clinch nuts, studs) → weld or rivet assembly → finish (powder, anodize, passivate) → inspection. For rules on bend radius, flange length and hole-to-bend distance, start with our sheet metal enclosure design guidelines. For process choice against printing or machining, use sheet metal vs 3D printing and CNC machining vs sheet metal.

Laser cutting, punching and nesting for enclosure panels

Fiber laser cutting is the first operation on most robot panels. It holds kerf well on mild steel, 304/316 stainless and aluminum 5052 in the 0.8–3 mm gauges common for covers. Turret punching still earns its keep when a panel has dozens of identical holes or louvers that a punch tool forms faster than a laser pierces one-by-one.

What designers forget: nest orientation. Grain direction on aluminum and stainless changes how the panel springs back after bending, and a logo or vent pattern that looks fine on the flat can land on a flange if the nest rotates the blank. Call out cosmetic faces and grain where it matters; mark keep-out zones for laser start pierces next to painted edges.

Decorative laser-cut metal panels fit enclosure design when the cut pattern is structural enough not to oil-can and when the finish will hide kerf discoloration — powder coat on steel, clear or dyed anodize on aluminum. Thin decorative webs under about 1.5× thickness wide will warp in powder cure; thicken the ligaments or switch to a punched pattern.

Press-brake bending vs sheet metal roll forming

Most robot covers are brake-formed: a handful of flanges, hems, and closed corners with reliefs. That is the right tool when every revision changes a bend angle or a hole pattern. Soft tools are not required; setup is a V-die and punch selection, then angle compensation for springback.

Sheet metal roll forming makes sense for robot components only when the section is constant along a long length and the volume justifies a roll set — continuous rails, wire-management channels, structural U-channels for a mobile base. A roll line amortizes tooling over thousands of meters. A 40-piece enclosure lot with three unique panel profiles will spend more time changing rolls than forming parts. For small-batch robot work, keep roll forming off the RFQ unless you already own the profile.

Practical brake rules that keep first articles on time:

  • Inside radius ≥ 1.0× thickness on mild steel, 5052 and 304; 1.5–2.0× on 6061 (prefer 5052 for folds).
  • Minimum flange ≈ 4× thickness + inside radius.
  • Holes ≥ 2.5× thickness + radius from the bend line, or drill after form.
  • Bend reliefs where two flanges meet so the corner does not tear.

Welding, hardware and welding holes in sheet metal

Frames and bay structures are usually MIG or TIG welded; thin cosmetic panels prefer clinch fasteners and rivets to avoid heat distortion. Spot welds work on steel stacks when access and electrode life allow. Call weld symbols on the drawing — not in an email — and state whether the weld face is cosmetic.

Can welding holes in sheet metal solve prototype enclosure changes? Often yes on non-show surfaces. A misplaced M4 clearance hole can be plug-welded, ground and powder-coated; the repair disappears under texture. On thin aluminum show panels, weld fill can print through the finish as a halo. Better late-change patterns:

  1. Move the feature in CAD and cut a new blank if quantity is low.
  2. Add a designed patch plate or welded boss instead of a freehand fill.
  3. Use a larger cover plate that hides obsolete holes until the next revision freezes.

Hardware selection belongs on the BOM before flat blanks are cut. Clinch nuts for service doors, weld studs for grounding, standoffs for PCB plates. Self-tapping screws into 1.5 mm aluminum are fine for a one-off prototype and a liability after the fifth service cycle.

Using sheet metal models before a production RFQ

A sheet metal model is not a pretty render. It is a formed solid (or SolidWorks sheet metal body) that encodes thickness, bend order, and corner reliefs. Before you send a production RFQ:

  • Build sheet metal models for every folded part — not a solid that someone will “unbend later.”
  • Mate panels to the frame in an assembly to catch flange collisions and fastener access.
  • Export STEP of the formed state; keep native SolidWorks if you want the vendor to inspect the feature tree.
  • Freeze revision letters on drawings that match the STEP file names.

Skipping this step is how teams discover that a door flange hits a weld bead, or that a cable gland lands on a bend line, after steel is already cut. For what a complete package looks like, see what to include in a drawing package and how to RFQ a China manufacturer.

Preparing sheet metal in SolidWorks for DFM review

Preparing sheet metal in SolidWorks for DFM review means using the Sheet Metal tools so K-factor, bend allowance and flat pattern are parametric — even if you will not send the flat pattern as authority. Checklist we run on inbound CAD:

CheckWhy it matters
Consistent thickness and material in the Sheet Metal featureWrong gauge in the property vs the drawing causes wrong nest and wrong quote
Bend reliefs and corner treatments presentMissing reliefs tear at the brake or force hand grind
Hole-to-bend and flange length vs shop rulesFlags drill-after-form or redesign before laser time is booked
Hardware holes sized for clinch / PEM specsUndersize holes scrap expensive inserts
Cosmetic faces and grain notesStops brushed stainless running the wrong way across a door set
No phantom flat-pattern dimensions as GD&TFlat pattern is derived; tolerances belong on the formed part

If your model is a multi-body solid without sheet metal features, expect a longer DFM loop. We can still quote from STEP, but bend-order risk sits with the buyer until the model is corrected.

Finish, inspection and when to mix processes

Powder coat (typically 60–100 µm per coat) is the workhorse for steel robot bays. Mask threads, grounding pads and sliding fits; allow ~0.15–0.2 mm clearance where panels must slide. Aluminum panels often take soft or hard anodize instead — see our anodizing compares if finish hardness matters. Stainless may ship brushed, passivated, or powder-coated over a blasted surface.

Inspection on sheet metal is different from CNC: overall envelope, hole positions on critical datums, flange angles, and weld quality. Do not paste a full ISO 2768 fine callout on every flange length; put tight GD&T only on mating hole patterns and interfaces that bolt to machined parts.

Many robot programs mix processes under one Suzhou base: sheet metal frames and panels, CNC brackets with bearing bores, vacuum-cast cosmetic covers, printed fixtures, and anodized aluminum details. That mix is normal. What we do not offer — and will not claim on this site — is die-cast production or medical-device certified manufacturing. Company scope and contacts are summarized in Everoyal Precision at a glance and on sheet metal China.

RFQ checklist for a robot enclosure sheet metal job

  1. STEP of formed parts + assembly if panels mate to a frame.
  2. PDF drawings with bend lines, angles, material/temper, finish, hardware.
  3. Quantity by revision, target dates, and whether first article needs FAIR photos.
  4. Notes on cosmetic class, EMI requirements, and grounding.
  5. Ship-to Incoterms preference if known.

Send the package through the contact / RFQ form or email sales@everoyalprecision.com. Rocky Chen usually returns a process route, DFM risks and a quotation within one working day when the drawing package is complete.

Related reading

Questions

When does sheet metal beat CNC or 3D printing for a robot enclosure?

When the geometry is mostly flat panels, brake flanges, welded frames or brackets and you need metal stiffness at small-batch cost. CNC wins on thick 3D housings with tight bores; plastic or metal print wins on complex freeform cosmetics before tooling.

Should I send a SolidWorks sheet metal flat pattern with the RFQ?

Send the formed 3D model (STEP) plus a 2D drawing with bend lines, angles, material and finish. Do not treat your SolidWorks flat pattern as manufacturing data — K-factor and tooling differ by shop.

When does sheet metal roll forming make sense for robot components?

Roll forming pays when you need long, constant-section profiles in higher volume. For short enclosure panels and changing bend sequences, press-brake forming is cheaper because there is no dedicated roll set.

Can welding holes in sheet metal fix a late enclosure change?

Yes for non-cosmetic panels: plug-weld, grind flush, refinish. On Class-A thin aluminum, prefer a new blank or a designed patch — freehand weld fill often shows after powder coat.

What belongs in a robot enclosure sheet metal RFQ package?

Formed STEP, PDF with bends and critical GD&T, material, finish, quantity, hardware callouts, and assembly context. Use /contact/ or sales@everoyalprecision.com.

Does Everoyal do die casting or medical-device certified builds?

No. Scope is CNC, sheet metal, vacuum casting/RIM, rapid tooling, 3D printing and finishing for industrial and robotics programs — not die cast or medical-device certification.

Start a program

Send the enclosure drawings, get a DFM view back

Rocky Chen replies with a process route, the bend and weld risks we see in your data and a quotation — usually within one working day.

Enquiry form and details

ContactRocky Chen
BaseSuzhou, Jiangsu, China. Visits by appointment.