Custom Bent Metal: What to Specify on a Robot Enclosure Drawing

A practical checklist for material, bends, holes, finish and tolerances so a China sheet-metal shop can quote custom bent metal without inventing missing notes.

A custom bent metal robot enclosure only quotes cleanly when the released drawing states finished geometry, material, thickness, bends, critical holes, finish, hardware, quantity and revision. The 2D PDF carries design intent; the 3D model supplies formed-surface context views alone may miss.

Cluster reading: how to plan sheet metal bending for robot covers, drawing-to-RFQ walkthrough, and the complete guide to custom sheet metal for robot enclosures.

Verifiable factory facts (Suzhou Everoyal)

  • Established 2017; ~80 people; ~10,000 m² base in Suzhou, Jiangsu.
  • On site: sheet metal (laser, turret punch, press-brake bend, weld, hemming); CNC machining; vacuum casting / RIM; rapid tooling; 3D printing; finishing (anodizing, powder coating).
  • MOQ: one piece. Same inspection chain scales from sample to small batch.
  • Not claimed: progressive high-volume die-stamping house; continuous progressive-die production; die-casting line; medical-device certification.
  • Contact: Rocky Chen · sales@everoyalprecision.com · WhatsApp +86 138 2330 4476 · RFQ upload on /contact/ (up to 2×4MB drawings).

Factory snapshot: Everoyal Precision at a glance. Service landing: sheet metal fabrication China.

Drawing checklist before you ask for a bent-metal quote

Put these items on the released package—or the factory will invent defaults that may not match assembly.

  • Material & temper: alloy or grade (for example 5052-H32, 6061-T6, SPCC, SGCC, 304), approved equivalents, grain direction if cosmetic, and corrosion or cleanability notes.
  • Thickness: nominal gauge or mm, and whether it is before or after coating.
  • Formed authority: which views and dimensions govern the formed part; treat the flat pattern as manufacturing support, not the contract geometry.
  • Bend set: inside radius, bend angle, bend direction relative to the formed view, any required bend sequence, and whether dims reference inside, outside or virtual sharp.
  • K-factor / allowance notes: only when your CAD unfolding rule must match the shop; otherwise ask the supplier to confirm bend deduction against their punch/die set.
  • Hole-to-bend & reliefs: minimum edge distance, relief style and size at corners, and which openings must be cut after bending.
  • Tolerances: general class plus critical-to-function dims with datums; state inspection before or after coating.
  • Finish & hardware: powder, anodize or brush; color or gloss reference; masked grounding; PEM nuts, rivets, weld studs or clinch fasteners in the BOM.
  • Quantity, revision, Incoterms: prototype vs small batch, revision letter, packaging, and FOB/CIF/DDP or other shipping notes for China RFQs.

For bend physics and copper vs steel notes, see plan sheet metal bending for robot covers. For the full RFQ pack, see the drawing-to-RFQ walkthrough and what to include in a drawing package.

Material and thickness control the bend

Material grade and temper change springback, minimum inside radius, weldability and coating prep. A soft 5052 cover and a 6061-T6 cover do not share the same brake setup. State thickness clearly; a 1.5 mm blank with powder coat is not the same stack-up as an uncoated 2.0 mm panel when the mating flange is already frozen.

Call out mixed construction early: reinforcement plates, welded nuts, threaded inserts, captive hardware and any secondary machined faces. Those features drive nesting, bend order and first-article inspection—not just unit price.

Bend geometry: radius, sequence, flat vs formed

Show the inside bend radius and angle on the formed view. Ambiguous “sharp bend” notes force the brake operator to invent a punch nose. If four flanges close a box, write the bend sequence when later bends would trap the punch or die. Mark which dimensions are flat-pattern only and which must match after forming.

Illustrative example: a robot electronics side panel with a cable cutout near a return flange. Dimension the cutout from a stable panel datum, not from the bent edge. If the hole sits inside ~2×–3× thickness of the bend start, expect distortion unless the shop lasers it after forming—and write that process note on the drawing.

Holes, cutouts, tolerances and finish

Locate connector openings, gland plates, fastener patterns and service access from datums that survive springback. Specify hole type, size, positional tolerance, countersink/counterbore and edge treatment. Apply tight tolerances only where assembly, sealing or sensor alignment depends on them; leave exterior return edges on the project’s general class.

Finish notes need more than a color name: surface prep, coating system, gloss, masking zones and conductive pads that must stay bare. State whether critical dims are inspected before or after coating. Process path at Everoyal: drawing to inspection.

China RFQ package for custom bent metal

Send one controlled package so quotes stay comparable:

  • Released PDF (formed views as authority) plus STEP, IGES or X_T.
  • BOM with hardware; material/temper/thickness; finish and masking.
  • Critical dims, datums, inspection method and first-article expectations.
  • Quantity, revision history, packaging and Incoterms / shipping notes.
  • Approved-deviation rules (for example bend-radius change or hardware substitute needs buyer sign-off).

Related China RFQ notes: how to RFQ a China manufacturer and Incoterms for prototype shipping. When machining may beat forming for the same envelope, read CNC sheet metal: when machining beats forming.

Direct recommendation: freeze material, thickness, inside radii, hole-to-bend rules, finish/masking and critical datums on the PDF before you request price. Upload the package through /contact/ or email sales@everoyalprecision.com. Everoyal quotes laser/punch/brake bent enclosures and CNC interfaces from Suzhou with one-piece MOQ.

Related reading

Questions

What must appear on a robot enclosure drawing before quoting custom bent metal?

State finished geometry, material and temper, thickness, quantity, revision, finish, critical tolerances, inspection method, hardware, and whether flat-pattern or formed dimensions govern. Send a controlled 2D PDF with STEP, IGES or X_T for bend context.

Which bend callouts belong on a custom bent metal drawing?

Call out inside bend radius, bend angle and direction, any required bend sequence, relief style, minimum flange length, and whether dimensions reference inside, outside or virtual sharp. Note K-factor or bend-allowance only when your CAD rule must match the shop setup.

How close can a hole sit to a bend on a robot cover?

A common planning rule keeps the nearest hole edge about 2×–3× material thickness from the start of the bend radius, then verify against tooling. Closer holes often distort; write post-bend laser or drill on the drawing instead of assuming the blank survives forming.

What should a China-factory RFQ include with the bent enclosure drawing?

Include the released PDF, native or neutral 3D model, bill of materials, material and finish specs, inspection points, quantity, packaging and Incoterms or shipping notes. Mark which dimensions cannot move and which bend-radius or hardware substitutions need buyer approval. Upload up to two drawings, 4MB each, on /contact/.

What sheet metal routes does Everoyal Precision actually run for bent enclosures?

At the Suzhou base Everoyal runs sheet metal with laser cutting, CNC turret punch, press-brake bending, welding and hemming, plus CNC machining and finishing for prototypes and small batches. MOQ is one piece. We are not a progressive high-volume die-stamping house and we do not run a die-casting line or claim medical-device certification.

Start a program

Send the bent-enclosure drawing package

Upload STEP/IGES/X_T plus the released PDF with material, bend radii, hole-to-bend notes and finish. Rocky Chen replies with DFM notes and a quotation — usually within one working day when the package is complete.

Enquiry form and details

ContactRocky Chen
BaseSuzhou, Jiangsu, China. Visits by appointment.